Linoleum flooring is commonly used in many houses and buildings. But due to its softness, it gets scratched and cuts easily. However, it is made up of natural material that damages moisture.
Most of us are moving towards installing vinyl plank flooring over linoleum. But you need help figuring out how to install vinyl plank flooring.
I will share a detailed guide about installing vinyl plank flooring in this guide. So, if you want to learn or understand the procedure, you should stick to the post. Let’s get started without further ado.
Things to Buy to Install Vinyl Plank Floors
You should know the essentials required to commence the installation procedure of vinyl plank floors over linoleum for your buildings. However, you can get those things easily without any hassle.
Vinyl Floor:
First, you need to get a vinyl floor for your house. Bring planks that are enough to install in your house. Moreover, you can get boxes of vinyl floor as well.
Bucket and Mop:
When you are installing vinyl plank, you need to clean it. For this purpose, you will need a bucket and mop.
White Vinegar and Cream of Tartar:
To remove the vinyl plank, you can use white vinegar and cream of tartar. However, you can get it from the near grocery store.
Scrubbing Pad:
To do the Linoleum flooring, you need a scrubbing pad. Otherwise, without a scrubbing pad, you will be unable to remove the toughest part of it.
Tape Measure:
To measure the length of your vinyl plank flooring, you need tape, so you can easily install your vinyl plank. If you start without measurement, you can not get the exact size. So, your shoot would be best if you had measurements.
Adhesive:
To attach vinyl plank on the floor, you may need adhesive glue. However, you can use any adhesive glue of any brand.
Roller:
To make a vinyl floor firmly, you need to buy a roller. However, you can see the difference between the floor on which the roller is applied and on which the roller is not. You will easily install it in your house.
Dry Cloth:
You must use a dry cloth when installing wooden floors in your house. If you use something hard, there will be scratches on the new furniture, which will not appear good.
Steps to Install Vinyl Plank Over Linoleum
You must follow the steps below to install a vinyl plank floor over the linoleum.
1. Allow Vinyl to Acclimate:
When you bring your vinyl plank into your house, you don’t have to put them or use them immediately. It would help if you let them dry, and then you can use them easily.
But how much time will you need to keep them away? The answer is 48 hours. After two days, you can easily use them without any problem.
If you don’t leave it for 48 hours, then when you apply the vinyl plank, it will start to expand, and you will lose it.
2. Remove Furniture:
Before installing the vinyl plank to remove furniture from your room, after removing furniture, you can now work easily without any problem.
3. Check Linoleum Tiles:
After removing the furniture, you have to check the linoleum tiles. If there is loose tile in your room, you have to your you must; removing all the loose corners and bumps in the tiles is important.
After removing bumps and other issues, you must clean the floor with soap and water to eliminate other particles and clean them wisely.
Once you clean the floor, you can now wait for the floor to dry. When the floor is dry, you can proceed with the procedure.
4. Place Vinyl Plank on Linoleum:
Before start placing the vinyl, you need to check the size of each plank. You have to use a measuring tape for this purpose. Moreover, without a measuring tap, you wouldn’t be able to place it with exact measurements.
5. Cut Extra Vinyl Plank:
After measuring the exact size of the vinyl plank, you need to cut the extra piece of vinyl flooring. However, if you don’t cut extra vinyl, then it wouldn’t fit the floor. It may be tight or loose. So, cut the exact size.
6. Place Vinyl Flooring:
The next step is to install vinyl flooring in your house. For this, you need to make pieces of vinyl plank. Furthermore, it is easy for you to do this.
First of all, you need to spread adhesive on the linoleum floor. Later on, placing the vinyl floor over the linoleum floor would be best.
7. Use Roller:
After placing vinyl flooring, you need to make it perfect by moving the roller over it. However, the roller will firmly press the tiles, making them more adhesive. Furthermore, you can easily make it firm and more reliable.
8. Let it Dry:
Now, after moving the roller, you must wait to be dried. However, you have to wait for it to dry. The dry vinyl plank stays longer as compared to the wet. If you use a wet floor, then the floor may get dislocated. So, it would be best if you used it with very precise attention.
9. Place the Baseboard:
Once you have placed the floor, you have to place the baseboard. Now, you can get the matching baseboard trim. Moreover, you can use the old one as well. So, it depends on you which you will use.
If you can not afford a new baseboard, you can paint it according to your tiles. you can match it with your furniture as well.
10. Place Your Furniture Back:
After completing your floor installation, you need to put back your furniture. However, you have to pick the furniture without dragging it. If you drag it, your floor will get scratched or damaged.
Things to be Considered
As mentioned, there are a few steps and care that you have to do. Let’s have a look at the points.
- Before installing vinyl plank, you need to wear gloves. So, your hands may not get damaged by any hard thing. However, you can also do the work more precisely.
- Before installing the vinyl plank, you to us the surface smooth. You can check whether the surface is smooth or not.
- When you install the vinyl plank, a smell may remain in your house unless you open doors and windows for the next two days. So, the wooden smell will disappear.
Why is Vinyl Plank Used for Flooring?
Most people will prefer vinyl plank over any other flooring. However, you can easily get it without any problem. There are many reasons to use vinyl plank. Let’s explore the benefits you get after installing vinyl plank in your home.
Cost-effective:
Some floors are very costly, and most people can not need help with that flooring material. But Vinyl plank is different from those because you can easily purchase it without any problem.
Easy to Maintain:
Sometimes, after installing a floor in your house, you may feel difficulty removing the dirt and dust from vinyl is not different from the type of flooring. It will provide ease and comfort to you.
Water-Resistant and Insulation:
Vinyl plank flooring has water-resistant properties and comes with insulation. You can easily clean the spreading of water on the floor.
You can use it for up to 10-20 years if you properly maintain it. Above all, the vinyl floor has insulation that protects it from scratches and damage. You can do it.
Durable:
Vinyl plank comes with many durabilities. However, you can easily use it with any problem. It can easily be exposed to water.
It is water resistant and can last for many years if properly taken care of. So, you should not be worried about its durability because it is more durable than any other flooring.
FAQs- Frequently Asked Questions
Can You Put the Vinyl Plank on Linoleum?
Suppose you have old Linoleum in your house and better condition. Then you can easily place the vinyl plank on it. However, placing the vinyl plank on your old floor is quite easy.
Do You Need Underlayment for Vinyl Flooring?
No, there is no need to use underlayment for vinyl flooring over Linoleum. Linoleum is waterproof; you don’t want any underlayment.
Do I Need to Remove Linoleum Before the Vinyl Plank Installation?
If the Linoleum floor is smooth and perfect, you don’t have to remove it. But if it is damaged, you should replace it with a new one. However, it would be best if you made the surface more smooth than the other surfaces.
Which Type of Adhesive Should You Use in Linoleum?
To combine linoleum, you have to use ROBERT 2072. However you can use any other, but this is commercial adhesive glue that perfectly combines the floor with Linoleum. This comes with strong adhesive glue that has the strength to combine with the floor.
Can You Put Vinyl Flooring on Old Linoleum?
Yes, but the thing is that the floor should be smooth enough. If the surface is not smooth, a bump will remain when you place the vinyl plank on it. So, before installing the vinyl floor, you should be aware of this thing.
Conclusion
Installing vinyl plank over linoleum is quite easy. You need to follow the steps given above. However, linoleum is perfect according to the material.
But when it fades off, you can use vinyl plank over it because vinyl is water-resistant and durable compared to Linoleum. It is quite soft and made up of natural material.
Having Linoleum is not only good, but it needs a little more care. However, you can easily use it.
Moreover, if you have any queries or issues during installing vinyl plank over Linoleum, I will surely solve your query. Just leave a comment if you have any queries.
This is really great and awesome. I love this article!