If you lost the suction power of your shark vacuum cleaner or you feel a dirty odor from it; then think about your last cleaning session with this machine.
The lifespan of this shark cleaning machine can be increased to some extent if you regularly clean it in the right way.
Here you will find complete guidelines for cleaning a shark vacuum suggested by professional cleaners. These proven steps can be followed effectively by any homeowner.
Now it’s time to roll up your sleeves and start cleaning your favorite shark vacuum cleaner on your own. Keep reading and be an expert on such cleaning jobs!
How Often Should You Clean Shark Vacuum and Its Filters?
There are various shark vacuum cleaners in the current marketplace. The cleaning time may be different for shark cleaner models.
As per the shark’s report, the user can clean as per their needs or when they feel that the bin capacity of these vacuums is getting full.
You can empty these bins after every cleaning session. If you want to maintain its suction power then you have to clean it on half-full.
A dirty vacuum cleaner might be less effective than the cleaned one. it is better to check its remaining gadgets as well to increase the lifespan of this valuable cleaning machine.
You should clean its rollers and hoses on a monthly basis to remove dust particles from them.
Some filters of the best shark vacuum cleaners are washable; it is better to closely monitor the filtration system of shark vacuum cleaners.
Tools / Equipment Required to Clean Shark Vacuum
- Microfiber cloths
- Larger bowl or sink
- Trash can
- Soft-bristled nylon brush
- Gloves to protect hands
- Drying rack
- Seam ripper or small scissors
Best Way to Clean a Shark Vacuum – Step by Step Instructions
The shark vacuum filters are a great utility item in any home. You can increase its lifespan by doing a good session of shark vacuum filter cleaning.
Many home cleaners think that it’s just the dustbin of shark floor vacuum that needs to be cleaned or replaced. It’s not true! You have to take care of every component of shark sweepers.
You can also read the owner’s manual of shark professional vacuum filters but here you will find detailed step-by-step instructions which guided you through the whole cleaning process in proper sequence.
Let’s me drive through this guide, stay tuned:
Step 1. Safety First
Step 1. Safety FirstIf you are using an electric outlet, you have to unplug the shark sweeper vacuum from its electrical station through a power cord.
It is more appropriate to take your vacuum cleaner to an outdoor place to shake its dirt particles.
Step 2. Inspect and Clean the Roller Brush
Step 2. Inspect and Clean the Roller BrushYou will find a lot of dust particles hidden or stuck in the rotating brush of your favorite shark rotator filter. There is a floor attachment near its handle; detach it.
If you find trouble, then don’t apply any force, there is a push button in most of the models. Just press this button to remove the brush head.
Now pull out all the dirt particles and other messes that are tangled in the roller brush. You can use a scissor or any soft brush for this purpose.
If you use wipes or rinse them with water, then allow this brush to dry in the air for at least 24 hours. Make it 100% sure that it is completely dried up, then re-attach it.
Step 3. Clean the Dust Collection Cup or Bin
Step 3. Clean the Dust Collection Cup or BinYou will notice different messes in your dust collection bin after every long or short cleaning session. If you think it is half-full, then it’s time to clean it as well.
All the messes collected in this bin should be trashed or cleaned for further use.
It is better to clean it with a wet sponge or rinse it with warm water to clear all the tiny particles inside or outside this container. All allow the gadgets of this bin to air dry and then re-install.
Step 4. Check the Hose
Step 4. Check the HoseNext! remove the hose and inspect it. If you find any obstruction or blockage, then must clean it on a priority basis.
It will reduce the suction power of your Shark duo clean filter. Remove this hose from the vacuum’s head.
You can use a microfiber cloth or dampen the inner surface of the hose to clean it. Never try this cleaning process with harder hands; otherwise, this hose gets punctured.
Step 5. Clean the Filters and Screens
Step 5. Clean the Filters and ScreensThe shark navigator lift-away filters are made of different materials depending on the models. If you find a shark vacuum HEPA filter in your shark machine then must read its description on the product box.
Some HEPA filters are washable and others are not!
The process of cleaning shark vacuum filters needs more construction than any other gear. If the filters of your machine are washable then you can soak them with soapy water.
Shark wet vacuum filters are usually designed to clean wet and sticky stains, so it is necessary to do this filtration cleaning process every month to maintain Shark vacuum filter cleaning.
Step 6. Wipe Down the Housing
Step 6. Wipe Down the HousingAs shark vacuums are cleaning products, so there are lots of stains and dirt particles hidden on their exterior housing. This excess dust should be removed within a certain time limit.
You can unplug your electric vacuum cleaner and sponge it with water. Dampened microfiber cloth is also great for this job.
Must observe the air vents near the motor, many tiny dirt particles are hidden here. Take your time and carefully remove them. Your vacuum machine will be shiny after air drying.
Step 7. Inspect the Electrical Cord
Step 7. Inspect the Electrical CordIf you are cleaning an electric vacuum cleaner then you have to inspect its electrical cord as well. The wires of most corded vacuum cleaners are exposed or cracked in different places.
You have to repair them efficiently before moving on.
Step 8. Reassemble the Vacuum
Step 8. Reassemble the VacuumFinally, reassemble all the gadgets for the new cleaning session. Make sure that all these parts are completely dry.
If you feel any moisture then remove it with a dry cloth before plugging your electric vacuum cleaner again.
FAQs – Frequently Asked Questions
How Do I Clean My Shark Vacuum?
The process of cleaning shark vacuum cleaners needs lots of concentration with minimal effort.
Discount your electric shark vacuum cleaner, clean all its gadgets, and reassemble again all these gears back into their main position for the smooth working of this machine.
Can You Wash the Shark Vacuum Canister?
The shark vacuum canister can be cleaned with a microfiber cloth. You can soak it with water or dampened cloth for a proper wash.
How Do I Clean My Shark Vacuum Filter?
Most of the shark rocket vacuum filters are washable. If it is so, you can remove it from its position and give a hand wash session to effectively remove all types of messes from it.
How Do You Take Apart a Shark Lift-Away Vacuum?
The process of shark navigator lift away filters can be easily done if you follow a proper sequence. You will find a push remove button with most other components.
You just need to hold this button to remove that gear. Similarly, all these gadgets can be re-attached with this cleaning machine without any difficulty.
If you are still confused then you can also read from the shark duo clean parts diagram or follow the instructions given in its description.
How Can I Make My Shark Vacuum Smell Better?
You can add a single teaspoon of cinnamon powder or your favorite ingredient to the water cleaning solution tank.
It will generate a stunning aroma on all cleaning surfaces and you will feel a better environment in your living rooms.
How Do You Clean a Shark Lift Brush?
You can see a pull tab on the shark vacuum cleaner. You need to push it to lift the brush. It can be reassembled with the help of this pull tab.
How Do You Clean the Brush Roll on A Shark Vacuum?
To maintain the brush roll, you have to detach it from a machine! It can be easily cleaned with a soft wipe or damp cloth with gentle hands.
Can You Wash Shark Hepa Filter?
Most of the modern models of shark vacuum cleaners contain washable HEPA filters. It allows you to wash these filters with your hands.
Final Words
This informative guide will ease up the process of cleaning a shark vacuum. You will surely inspect your vacuum cleaner filters and other components periodically.
It is great if you trash all the messes from your dust collection cup every time before starting a new cleaning session.
The detached components should be reassembled again but make it 100% sure that all these gears are completely dried.
If you forget about how to connect any part again then you can see its user’s manual and re-attach the component in the right way.
I hope that you enjoy the cleaning tips in this exciting guide, and apply them to your favorite shark vacuum cleaner!
Leave a Reply