Epoxy floors have been widely identified as being the most long-lasting flooring option. Normally, people install them in garages or basements, but we have seen these floors in many commercial areas. I have been scrolling about these floors, and a question suddenly pops up. ‘Can you Epoxy Shower Floor?’
I researched the answer and came to know Yes, you can epoxy shower floors as per the requirement because this flooring is customizable. It gives a stylish appearance and enriches the value of your washroom.
We will talk more about it exhaustively in today’s guide. I will also share the installation technique because I might get my hands on this flooring sooner. Moreover, a few tips that you should keep in mind will be conveyed below to sidestep common mistakes. A lot of exciting stuff is coming your way, be prepared.
Guide to Epoxy Shower Floor
- Get an Epoxy floor kit to get all the demanded products before installation.
- Make the floor prepared for the Epoxy application by making the surface dry and clean.
- Organize the solution and apply it with a damp sponge.
- Fill each corner and part without leaving a single space.
- Once done, satisfy yourself by checking the work.
- Let the surface dry before starting to use the floor.
How to Use Epoxy on Shower Floor?
Epoxy flooring is not specified to a particular surface; you can install it wherever you want. It will give the same level of durability everywhere. Let me share the uses of Epoxy flooring on a shower floor.
1- Used as a Sealant
Epoxy has a waterproof trait, so installing them in wet areas will never be an issue. Once you have installed tile in your washroom, Epoxy flooring will sweeten the overall look and make the place pre-eminent for a maximum number of years.
After installing, you better wait a week before using it. However, it takes only 12 hours to get a fully dried surface.
2- Use as a Decoration
Epoxy flooring can be customized according to your taste, so if you want a new look to your washroom and tiles, you can use an Epoxy resin material. Many people simulate jewelry pieces from Epoxy material.
Many people prefer glossy tiling, so pick the glittery option. Similarly, this flooring composes of numerous materials, including glossy and decent. Prefer according to your conditions and desire.
3- Use as a Grout
To get a rigid connection between shower tiles so all the gaps can be filled, use Epoxy as a grout. You are already convinced with durability, it also has innumerable color options, so you will surely get your taste.
It will also help you mend a few damaged grouts that look odd in your washroom. After this, you will never complain about the discolored grout. The only problem I found is maintenance, but if you properly maintain it, be relaxed for the next 15 years.
Steps to Apply Epoxy on Bathroom Floors
You must be eagerly waiting for the ways that define how to spread this amazing epoxy to your beautiful shower ties. Your wait is over now. I researched different articles and tried to convey it in the simplest way possible for everyone planning to get this flooring in their bathroom. Let’s start with the ideas.
1- Prepare the Surface
The most meaningful task before installing Epoxy flooring is to organize the surface or a room where the installation will emerge. The room should be warm so the epoxy can be easily dried. In cold rooms, Epoxy won’t be dried. Ensure you have an Epoxy shower floor kit that helps in the methodology.
Before starting work, you must have Vinegar, Epoxy Grout, Sponge, Water, Trowel, etc. Moreover, the shower floor must be spotless and dry before the process.
2- Prepare the Grout
To make a grout, you need to mix the Epoxy that comes in 2 parts. The instructions are written on the box, so precisely follow them to evade blunders. Confirm the solution is soft so it can effortlessly spread on the tiles.
You can take advice on which Epoxy material will be appropriate for your bathrooms. Once done, move toward the next phase.
3- Begin Grout Application
To commence this step, get your hands on a sponge and a scraping stick for soft application. Take a damp sponge for easy application. You might need to wet it again, so keep water beside you.
Start from the small area, and use a scraping stick to buff the surface after one coat. Keep repeating until you have spread the grout to the required area. You should be efficient enough to quickly extract the excess grout from the surface because you won’t pull it once it dries.
Better take the help of a second person so the work can be done smoothly. If any grout particles are still present that look odd, use vinegar that will support you clear the surface. If the grout doesn’t come off on the first try, repeat it until you are successful.
4- Ensure the Work
You must go through the entire work to make yourself satisfied. Examine the application deeply so you can recover it on time. Not a single area must be missed, so scan whether the entire surface has been grouted.
5- Let the Surface Dry
Here is the last and vital step of this approach. Normally, Epoxy takes a few hours to dry, but I suggest not using the washroom before one week, so you are sure the washroom is fully ready.
So, these are the simple steps you can readily pursue to install an Epoxy shower floor over tile.
Disadvantages of Epoxy Coating for Shower Floor
You will face a few cons once you plan to install epoxy flooring. Before deciding on the installation, it is meaningful to have full knowledge.
- In a few Epoxies, toxic and harmful fumes have been used, so you will be in trouble while applying the Epoxy on the floor. Be careful.
- It is complicated to remove the Epoxy once it is installed. You must hire someone for this work.
Other than these two, Epoxy flooring is worth applying with countless advantages.
Tips to Avoid Slipping on Wet Epoxy
Unfortunately, the Epoxy floor becomes slippery when wet. I did search for the answers to evade this problem. They are:
- To enhance the grip, you can use Silica but remember you might lose the shine to some extent.
- You can also use aluminum oxide to make the floor non-slip, but be inclined to tricky cleaning after using it.
- Different Synthetic rubber mats available in different designs and colors are in the market that immerses moisture and makes the floor less slippery.
- Lastly, carpet runners can also be a great alternative to slippery floors.
FAQs – Frequently Asked Questions
I am sure you fully understand each step and are now set for epoxy shower floor DIY. Let’s check a few questions.
Can I Epoxy My Washroom Floor?
You can epoxy the floor because it is durable and is a splendid addition to your bathrooms. You can craft the solution as mentioned in the box. The procedure is also given in this guide for your assistance.
Are Epoxy Floors Waterproof?
They are said to be waterproof, yet you should explore them before using them. Epoxy resin material has this trait, but we are unsure about others.
What is the Worth-Using Epoxy for Shower Floors?
Everlast Epoxy flooring is the most okay among all the options. It is durable and also makes it uncomplicated to clean the surface. It is also straightforward to maintain. You will never face issues even if your washroom remains wet.
Is Epoxy Flooring Becoming Slippery When They Are Wet?
You need to make the epoxy flooring non-slip by following different tips, including silica or Aluminium oxide usage. Different synthetic rubber mats or carpet runners can also be the solution for slippery flooring.
In Closing
Epoxy Shower floor is a terrific expansion to make your bathroom space appealing and worth appreciating. If you plan to renovate your washrooms, adding Epoxy is enough to change the overall look. The installation process is simple, and I have tried to communicate it in the most pleasing way, so you do not need anyone’s help.
Be attentive regarding a few cons I have portrayed above. Moreover, buy Epoxy from a well-known retailer to get a durable and exemplary product. Instead of buying individual items, get your hands on an Epoxy kit so you have all the required things before starting work.
I hope you are pleased with the details I have described. Follow the steps for remarkable results.
Leave a Reply