How to Clean Window Tracks Like a Pro?

If you find any difficulty sliding your windows or find plenty of dust in the tight corners of your window right after the spring season, then you must know the right way to clean window tracks.

You may notice plenty of dusty stuff in your window tracks and sills right after the spring sprung. These dirt particles are inflowing your home with air and make dusty all the other appliances of your home.

You must immediately tackle the situation and follow the instructions given in this article for the best cleaning results in your window tracks.

How to Clean Window Tracks at Home?

Initially, get yourself prepared for this cleaning job with the right equipment. After this, you should do a quick vacuuming in your window tracks. Apply the baking soda powder and vinegar separately to create a fizzy situation on tougher stains.

Next! Scrub the stains with a toothbrush and scrape the drier spills with a knife. Do a final clean-up of the entire window area with soapy water and dry all the moisture will a hairdryer or ventilation method.

Tools and Materials Required

• White vinegar
• Toothbrush
• Scrub brush
• Baking soda
• Hairdryer
• Spray bottle
• Sponge
• Vacuum cleaner
• Hydrogen peroxide
• Stanley knife

Best Method to Clean Window Tracks – 6 DIY Steps

I have figured out to clean my window tracks within 30 minutes. This hack is simple enough that anyone can adopt it without purchasing any toolkit or expensive gear.

You have to clean window tracks two or three times a year. This cleaning exercise should be considered after autumn because you will notice plenty of outdoor spills in your home interiors.

The best way to clean window sills and their track is to handle the debris and mold growth. These are two dangerous messes that should be intensely targeted in this cleaning process.

Don’t forget to clean the window screens as well if they are dirty. Their cleanliness is as important as their other parts.

You can adopt a window track cleaning tool for this purpose, but a DIY approach can also be followed if you consider the following easy steps for this cleaning job in the right sequence:

Step 1. Gather All the Gears

---

You have to prepare yourself for this cleaning challenge by gathering all the necessary gadgets and placing them at your nearby place. This will give you more focus on our window slider track cleaning tasks.

Now you can open up the dirty window and inspect its ugly condition. The window tracks may be filled with dust, and there is a chance of mold growth.

One can do so with or without the window screen in its place. Experts suggest getting rid of the screen and keeping it in some other place and then cleaning the dirt in tracks.

Before you start worrying about these messes, the good news here is that you will get rid of all these stains and spills with the available gears in a single go.

It is not essential to use a track and sill brush cleaning set or any other expensive kit for this cleaning job. The next steps will give you effortless cleaning without any doubt.

Step 2. Simple Vacuum Session

---

Grab the vacuum cleaner with its crevice tool and make it functional for this dirty window. The narrow nozzle of your vacuum will easily trap the hidden dirt and mold particles from their root. It will also catch dead insects to clean the window’s track completely.

If you have a vacuum hose with good suction power, you can use this effective tool for cleaning window sills and tracks; it will help you pull out all the debris and loosen dirt from the surface; here, half of your job has been done!

Step 3. Use Baking Soda to Cover All Stains

---

Next! There is still a chance that many tougher stains adhere to the surface of the windows track, or some worst parts are still left.

Here you have the option to use a window track cleaner, but a natural hack will fix this problem in a better way.

Now you can sprinkle some baking soda on these older stains to clean window sills and tracks; never forget about the corners, as most mysterious stains are hidden in them.

Use the plastic spoon to cover the spotty stains with baking soda. You will notice that this natural ingredient is spread all over the surface of window rails and sills.

Make some adjustments to this white powder to window screen corners for more effective cleaning results.

Step 4. Add Vinegar

---

Further, you must saturate this baking soda with vinegar to clean window tracks. It is better to pour the surface with the right amount of vinegar directly. Never add too much quantity of vinegar solution so that it may wash away the previous ingredient.

If you find any difficulty applying the right amount of vinegar, then you can add this solution to a spray bottle and use its nozzle for a pro act.

The mixture of these two household products will create a slight fizzy situation. The baking soda powder will give you a bubbling reaction here.

This damp condition will lose all the tougher surface stains and automatically lift with this natural solution.

Step 5. Scrubbing Time

---

Now you have to do a scrubbing session! This elbow grease method will easily clear the stains from window slides and deep window sill surfaces.

Here again, you can use a window groove cleaning brush, but it’s better to grab a toothbrush from your gadgets and start scrubbing the natural window sill cleaner placed on it with gentle hands.

Take care of the corners once more to clean window tracks proficiently and gather all the messes at the center of window tracks and sills; this will do this cleaning task rather nicely.

If some spills are too hard for toothbrushes, you can pick the Stanley knife to scrape off the stains from the window’s surface.

The best way to clean window tracks by scrubbing is to tackle the hard-to-reach areas. You can use a toothpick instead of a toothbrush to target close-fitting areas and tight spots.

Eventually, you will notice that your tracks, rails, sills, and other window components start shining like a newer one.

Step 6. Wipe Down

---

Now last but not least, you have to eliminate all this mess from the surface of the window track to finish this cleaning job. You can use a paper towel or wet rag to wipe down the entire surface.

To wipe everything down, you should collect all the messes and the cleaning stuff with a rag or microfiber cloth and clean the surface.

You will see a pleasant view of a neat window track. You can leave it for some time to air dry or can accelerate this drying process with a hair dryer.

If you think a final wash is required, you can clean the window tracks with soapy water again for a fresher look.

Window Track Cleaning Tips

Here you will get some quick tips for cleaning window tracks:

• Take care of the worst part of the window tracks and pay special attention to these stains.
• Lose the gunk with a stiff brush and wipe it out to remove its debris.
• Always use the right attachment with your vacuum for such cleaning jobs.
• Try to discourage the window sill cleaner tool and do the remaining cleaning of sills and rails with the same window track cleaning exercise.
• Use a plastic spoon to spread the baking soda in tighter spaces on the window track.
• Dampen the track of your window for quick cleaning.
• Use the butter knife to scrape the drier spills.
• You can use lubrication in corners. Further, open and close the window several times to spread its wax perfectly. It will reduce your cleaning job of window tracks.

How to Clean Mold from Window Tracks?

The mold in the tracks of your window is another major concern to tackle. It can grow quickly in the wooden stuff and will damage it invisibly. You may realize very late how dangerous this type of mess is.

You should use a powerful cleaning product to disinfect this stain. This type of bug can’t be eliminated with the traditional scrubbing technique.

Hydrogen peroxide is the perfect cleaning product to get rid of such messes. You must pour the mold part of your window tracks with this acid. An easy way to directly apply this cleaner is using a spray bottle.

You can spray down all parts of the mold area in your window and wipe this cleaner down after 10 to 15 minutes. You will see the magic as all the mold particles have been disinfected from your window surface.

How Often Should You Clean Window Tracks?

There is no cleaning time or schedule for your home objects. You can perform the cleaning job anytime or as needed. In the case of cleaning window tracks, sills, or rails, it is recommended by pro cleaners that you should do this task at least twice a year.

Suppose you reside in a dusty area, and your window tracks might accumulate more dirt or dust particles.

In that case, you must make your cleaning schedule accordingly or do a quick cleaning session after every spring or autumn season.

FAQs – Frequently Asked Questions

What is the Best Way to Clean Sliding Window Tracks?

The ideal method to clean sliding window tracks is to use natural ingredients. You must sprinkle a layer of baking soda on tougher stains and add vinegar after 10 minutes to create soapy stuff.

It will lose all the sticky spills and tougher stains from the window track surface.

How Do Professionals Clean Window Tracks?

Some pro cleaners may recommend commercial cleaning products, but still, most professionals use natural ingredients to clean window tracks.

How Do You Clean Window Sills and Tracks?

To clean sills and tracks, use a dishwashing liquid and a soft scouring pad to clean the surfaces of your window.

How Do You Clean Deep Window Tracks?

The blend of white vinegar and baking soda will give you a perfect chemical reaction to treat tougher stains and deeper dirt particles from the surface of your window tracks.

Is There a Tool to Clean Window Tracks?

There is a groove gap cleaning tool kit featuring eight gears that will perfectly clean window tracks. You will also find plenty of other options from your local market, but this tool is recommended in most cases.

Conclusion

I don’t think that you ever need any professional service to clean the window tracks of your home. You just want to make sure that you are observing all the instructions given in this informative guide for the perfect cleaning results.

You should perform this cleaning exercise once or twice a year and don’t need to do this task more often until you see grime or dust in its corners.

This proven cleaning method removes all the nasty stuff from the edges of your window sills and rails. The cleaning tips will eliminate the option of purchasing window tracks cleaning toolkit from your mind.